GS 350 AWD V6-3.5L (2GR-FSE) (2009)
OK -- Continue to next step.
2. CHECK WIRE HARNESS (BATT, IG1, IG2, GND)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE GATEWAY CAN ECU
Power Steering ECU Communication Stop Mode
CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: Power Steering ECU Communication Stop Mode
Power Steering ECU Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM