GS 350 AWD V6-3.5L (2GR-FSE) (2009)
/Page-969026.png)
-
If the result is not as specified, there may be a malfunction on the wire harness side.
18. CHECK POWER SOURCE CONTROL ECU
(a) Disconnect the K73 ECU connector.
(b) Measure the voltage and resistance of the wire harness side connector.
-
If the result is not as specified, there may be a malfunction on the wire harness side.
19. CHECK CERTIFICATION ECU
(a) Disconnect the U28 ECU connector.
(b) Measure the resistance and voltage of the wire harness side connector.
-
If the result is not as specified, there may be a malfunction on the wire harness side.
20. CHECK TIRE PRESSURE WARNING ECU
