GS 350 AWD V6-3.5L (2GR-FSE) (2009)
/Page-30001.png)
Keyless Entry Module: Testing and Inspection
DOOR LOCK: DOOR CONTROL RECEIVER: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. CHECK DOOR CONTROL RECEIVER
(a) Disconnect the U36 receiver connector.
(b) Measure the voltage of the wire harness side connector.
Standard voltage:
-
If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Reconnect the U36 connector.
(d) Measure the voltage of the connector.
Standard voltage:
-
If the result is not as specified, the receiver may have a malfunction.
