GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Control Module HVAC: Service and Repair
Installation
AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: INSTALLATION
INSTALLATION
1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
(a) Install the A/C amplifier with the screw and connect the connector.
2. INSTALL NO. 2 AIR DUCT
(a) Install the air duct and screw.
3. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Installation
4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Front Passenger Side Knee Airbag Assembly/Installation
5. INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Installation
7. INSTALL CONSOLE UPPER PANEL ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
8. REMOVE FRONT CONSOLE UPPER PANEL GARNISH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Installation
9. INSTALL INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
10. INSTALL FRONT DOOR OPENING TRIM COVER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
11. INSTALL FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
13. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.