GS 350 AWD V6-3.5L (2GR-FSE) (2009)
NOTE:
Do not twist the curtain shield airbag assembly when installing it.
(b) Connect the connector.
NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.
2. INSTALL ROOF HEADLINING ASSEMBLY
See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
HINT: Refer to the procedures from "INSTALL ROOF HEADLINING ASSEMBLY".
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
5. INSPECT SRS WARNING LIGHT