GS 350 AWD V6-3.5L (2GR-FSE) (2009)
NOTE:
The 2 washers should be of the same thickness.
3. INSTALL AIR GUIDE PLATE OUTSIDE RH
(a) Install the air guide plate outside RH with the 4 nuts.
4. INSTALL FRONT FLOOR NO. 1 HEAT INSULATOR See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and
Repair/Installation
5. INSTALL FRONT EXHAUST PIPE ASSEMBLY See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and
Repair/Installation
6. INSTALL HEATED OXYGEN SENSOR (for Sensor 2)
7. INSTALL FRONT FLOOR BRACE CENTER See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Installation
8. INSTALL FRONT FLOOR COVER CENTER LH See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and
Repair/Installation
9. CHECK FOR EXHAUST GAS LEAKS See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Installation