GS 350 AWD V6-3.5L (2GR-FSE) (2009)
Valve Body: Service and Repair
Installation
UF1AE TRANSFER: TRANSFER VALVE BODY ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL TRANSFER CONTROL SOLENOID See: Service and Repair/Overhaul/Reassembly
2. INSTALL TRANSFER VALVE BODY ASSEMBLY
(a) Connect the transfer wire connector to the transfer control solenoid.
(b) Install the transfer upper valve body with the 4 bolts.
Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
3. INSTALL TRANSFER OIL PAN See: Service and Repair/Removal and Replacement/Transfer Case Wire/Installation
4. INSTALL TRANSFER DYNAMIC DAMPER See: Service and Repair/Removal and Replacement/Transfer Case Wire/Installation
5. INSTALL ENGINE REAR MOUNTING MEMBER See: Service and Repair/Removal and Replacement/Transfer Case Wire/Installation
6. INSTALL FRONT EXHAUST PIPE ASSEMBLY
See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Installation
7. ADD AUTOMATIC TRANSMISSION FLUID See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/A760H
Automatic Transmission/Transmission Assembly/Installation
8. CHECK FOR EXHAUST GAS LEAKS