GS 350 RWD V6-3.5L (2GR-FSE) (2007)
1. INSTALL CLEARANCE WARNING ECU ASSEMBLY
a. Install the clearance warning ECU with the nut.
b. Connect the clearance warning ECU connector.
2. INSTALL GLOVE COMPARTMENT DOOR SUBASSEMBLY
3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
5. INSTALL INSTRUMENT SIDE PANEL RH
6. INSTALL FRONT DOOR OPENING TRIM COVER RH
7. INSTALL FRONT DOOR SCUFF PLATE RH
8. INSTALL CONSOLE UPPER PANEL ASSEMBLY
9. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. PERFORM INITIALIZATION (a) Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.