GS 350 RWD V6-3.5L (2GR-FSE) (2007)
a. Hold the connector cover and connect the switch to the steering pad switch cable.
b. Attach the 2 claws and close the connector cover.
c. Attach the steering pad switch cable's tab to the switch, as given in the illustration.
d. Attach the clip and 2 claws to install the switch.
e. Install the screw.
3. INSTALL STEERING WHEEL PAD
4. INSTALL NO. 2 STEERING WHEEL COVER LOWER
5. INSTALL NO. 3 STEERING WHEEL COVER LOWER
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.