GS 350 RWD V6-3.5L (2GR-FSE) (2007)
-
Install the screws in the order given in the illustration.
-
Do not touch the cone part of the speaker.
c. Connect the connector.
2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
3. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
Rear Speaker
Rear Speaker
REAR SPEAKER
REMOVAL
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.