lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Parking Assist System - Calibration Procedure|Page 10541 > < Parking Assist System - Calibration Procedure|Page 10539
Page 1
background image

Parking Assist Control Module: Service and Repair

Clearance Warning ECU

CLEARANCE WARNING ECU 

REMOVAL 

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:  Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
 

2. REMOVE FRONT DOOR SCUFF PLATE RH
3. REMOVE FRONT DOOR OPENING TRIM COVER RH
4. REMOVE INSTRUMENT SIDE PANEL RH
5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
6. REMOVE CONSOLE UPPER PANEL ASSEMBLY
7. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
9. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

10. REMOVE GLOVE COMPARTMENT DOOR SUBASSEMBLY

Parking Assist System - Calibration Procedure|Page 10541 > < Parking Assist System - Calibration Procedure|Page 10539