GS 350 RWD V6-3.5L (2GR-FSE) (2007)
Clean the name plate.
1. Using a heat light, heat the name plate.
2. Remove the double-sided tape from the name plate.
3. Wipe off any tape adhesive residue with cleaner.
4. Apply new double-sided tape to the name plate.
c. Install the name plate.
1. Using a heat light, heat the vehicle body and name plate.
2. Remove the peeling paper from the face of the name plate.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
3. Install the name plate.
3. INSTALL LUGGAGE COMPARTMENT NO. 3 DOOR PLATE
a. Clean the vehicle body surface.
1. Using a heat light, heat the vehicle body surface.
2. Remove the double-sided tape from the vehicle body.
3. Wipe off any tape adhesive residue with cleaner.
b. If reusing the door plate:
Clean the door plate.
1. Using a heat light, heat the door plate.
2. Remove the double-sided tape from the door plate.
3. Wipe off any tape adhesive residue with cleaner.
4. Apply new double-sided tape to the door plate.
c. Install the door plate.
1. Using a heat light, heat the vehicle body and door plate.
2. Remove the peeling paper from the face of the door plate.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
3. Install the door plate.