GS 350 RWD V6-3.5L (2GR-FSE) (2007)
b. If reusing the emblem:
Clean the emblem.
1. Using a heat light, heat the emblem.
2. Remove the double-sided tape from the emblem.
3. Wipe off any tape adhesive residue with cleaner.
4. Apply new double-sided tape to the emblem.
c. Install the emblem.
1. Using a heat light, heat the vehicle body and emblem.
2. Remove the peeling paper from the face of the emblem.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
3. Install the emblem.
2. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/ Dynamic Radar Cruise Control System)
a. Attach the 2 claws.
b. Install the 2 spring nuts and emblem.
3. INSTALL RADIATOR GRILLE
a. Attach the 5 claws to Install the radiator grille.
b. Install the 2 clips.