GS 350 RWD V6-3.5L (2GR-FSE) (2007)
Torque: 3.8 N*m (39 kgf*cm, 34 in.*lbf)
(b) Connect the ECU connector.
2. INSTALL NO. 1 COOLING FAN MOTOR
(a)
Install the motor with the 3 screws.
Torque: 2.6 N*m (27 kgf*cm, 21 in.*lbf)
(b) Connect the ECU connector.
3. INSTALL NO. 2 FAN
(a)
Install the fan with the nut.
Torque: 6.2 N*m (63 kgf*cm, 55 in.*lbf)
4. INSTALL NO. 1 FAN
(a)
Install the fan with the nut.
Torque: 6.2 N*m (63 kgf*cm, 55 in.*lbf)
5. CHECK COOLING FAN MOTOR OPERATION
(a)
Check the No. 1 and No. 2 cooling fan motor operation.
(1) Check that the fan rotates smoothly by hand.