GS 350 RWD V6-3.5L (2GR-FSE) (2007)
26.
Remove the timing chain cover plate by removing the 4 bolts timing chain cover plate and timing chain cover plate gasket.
27.
Set the No.1 cylinder to TDC/compression.
A.
Set the timing mark to 0° on the timing chain cover by rotating the crankshaft clockwise.
B.
Check that the timing marks of the camshaft timing gear assembly are aligned with the timing marks of the camshaft bearing cap.
HINT
If the timing marks are NOT aligned, turn the crankshaft one revolution (360°) clockwise and align the timing marks.
C.
Using a paint marker mark the sprocket wheel timing mark of the camshaft timing gear assembly and the timing chain itself.
HINT