GS 350 RWD V6-3.5L (2GR-FSE) (2007)
1. INSTALL TAILPIPE BAFFLE SUB-ASSEMBLY
(a)
Align the cutout of the baffle with the protruding part of the tailpipe as shown in the illustration.
(b) Using a plastic-faced hammer, uniformly tap the baffle onto the tailpipe until the cutout on the bottom of the baffle is aligned with the mark
on the bottom of the tailpipe.
2. INSTALL TAILPIPE ASSEMBLY
(a)
Connect the 6 exhaust pipe supports to install the tailpipe.
3. INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY
(a)
Install the support bracket with the 2 bolts.
Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
4. INSTALL FRONT EXHAUST PIPE ASSEMBLY