GS 350 RWD V6-3.5L (2GR-FSE) (2007)
2. REMOVE COOL AIR INTAKE DUCT SEAL
3. REMOVE FRONT BUMPER COVER
4. REMOVE SMOG VENTILATION SENSOR
a. Disconnect the connector.
b. Remove the bolt and sensor.
INSTALLATION
1. INSTALL SMOG VENTILATION SENSOR
a. Install the sensor with the bolt and connect the connector.
2. INSTALL FRONT BUMPER COVER
3. INSTALL COOL AIR INTAKE DUCT SEAL
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.