GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1554002.png)
pretensioner activation.
4. REMOVE ENGINE ROOM SIDE COVER RH
5. REMOVE ENGINE ROOM SIDE COVER LH
6. REMOVE NO. 1 AIR CLEANER INLET
7. REMOVE FRONT BUMPER COVER
8. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)
9. REMOVE RADIATOR SUPPORT OPENING COVER
10. REMOVE HOOD LOCK CONTROL CABLE COVER
11. REMOVE HOOD LOCK ASSEMBLY
12. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
a. Using a clip remover, detach the 6 clamps and remove the wire harness.
b. Disconnect the connectors.
c. Remove the 5 bolts and radiator support.
13. REMOVE LIQUID TUBE SUB-ASSEMBLY A
