GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1554006.png)
10. INSTALL NO. 1 AIR CLEANER INLET
11. INSTALL ENGINE ROOM SIDE COVER LH
12. INSTALL ENGINE ROOM SIDE COVER RH
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. CHARGE REFRIGERANT
15. INSTALL COOL AIR INTAKE DUCT SEAL
16. WARM UP ENGINE
17. CHECK FOR LEAKAGE OF REFRIGERANT
18. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
