GS 350 RWD V6-3.5L (2GR-FSE) (2007)
a. Install the air duct and screw.
3. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
5. INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY
6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
7. INSTALL CONSOLE UPPER PANEL ASSEMBLY
8. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
9. INSTALL INSTRUMENT SIDE PANEL RH
10. INSTALL FRONT DOOR OPENING TRIM COVER RH
11. INSTALL FRONT DOOR SCUFF PLATE RH
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
13. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.