lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Headlamp Alignment Sensor|Locations|Page 11880 > < Headlamp Alignment Sensor|Locations|Page 11878
Page 2
background image

2. REMOVE HEIGHT CONTROL SENSOR SUBASSEMBLY REAR

a. Connect the 3 dry cell batteries (1.5 V) in series.
b. Remove the height control sensor.
c. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead from the battery to terminal 3.

d. Measure the voltage between terminals 2 and 1 while slowly moving the link up and down.

If the result is not as specified, replace the sensor.

Headlamp Alignment Sensor|Locations|Page 11880 > < Headlamp Alignment Sensor|Locations|Page 11878