GS 350 RWD V6-3.5L (2GR-FSE) (2007)
-
Use the same procedures for the RH side and LH side.
-
The procedures listed are for the LH side.
1. INSTALL HEIGHT CONTROL SENSOR SUBASSEMBLY REAR
a. Install the height control sensor with the 2 bolts.
Torque: 13.5 N.m (138 kgf.cm, 10 ft.lbf)
b. Align matchmarks on the height control sensor and bracket.
c. Install the nut.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
d. Connect the connector.
e. Install the rear tire.
2. INSTALL HEIGHT CONTROL SENSOR SUBASSEMBLY FRONT
a. Install the height control sensor with the 2 bolts.
Torque: 13.5 N.m (138 kgf.cm, 10 ft.lbf)