GS 350 RWD V6-3.5L (2GR-FSE) (2007)
(b) Inspect the front suspension lower arm assembly.
(1) Remove the front suspension lower arm assembly, see the REPLACEMENT.
(2) Measure the dimension between the center of the front suspension lower arm assembly bush and position A.
Standard: 362 mm (14.25 in.)
HINT:
If the dimension of the front suspension lower arm assembly changes 2 mm (0.079 in.), the camber will change approximately 15'
(0.25°).
(c)
Inspect the front suspension upper arm assembly.
(1) Remove the front suspension upper arm assembly, see the REPLACEMENT.
(2) Measure the dimension between the center of the front suspension upper arm assembly bush and the ball joint stud.
Standard:
A: 250 mm (9.84 in.)
B: 231 mm (9.09 in.)
HINT:
If the dimension of the front suspension upper arm assembly changes 2 mm (0.079 in.), the camber will change approximately 15'
(0.25°).