GS 350 RWD V6-3.5L (2GR-FSE) (2007)
4. REMOVE V-RIBBED BELT
(a)
Rotate the tensioner pulley counterclockwise to loosen the belt tension. Then remove the V-ribbed belt.
NOTICE:
^
The pulley bolt for the belt tensioner has a left-handed thread.
^
Do not perform this procedure from underneath the vehicle, as the tensioner may be damaged.
(b) Insert the 5 mm hexagon wrench into the hole to fix the belt tensioner.
INSTALLATION
1. INSTALL V-RIBBED BELT
(a)
Install the V-ribbed belt.
(b) While turning the belt tensioner counterclockwise, remove the 5 mm hexagon wrench.
NOTICE:
^
Put the backside of the V-ribbed belt on the tensioner pulley and idler pulley.
^
Check that the V-ribbed belt is properly set to each pulley.