GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-404002.png)
(a)
Align the mark plate (yellow) with the timing marks (2 dot mark) of the camshaft timing gears as shown in the illustration.
(b) Apply a small amount of engine oil to the bolt threads and bolt-seating surface.
(c)
Align the knock pin of the camshaft with the pin hole of the camshaft timing gear. Install the camshaft timing gear and camshaft timing
exhaust gear with the No. 2 chain installed.
(d) Hold the hexagonal portion of the camshaft with a wrench, and tighten the 2 bolts.
Torque: 100 N*m (1020 kgf*cm, 74 ft.*lbf)
(e)
Remove the pin from the No. 2 chain tensioner.
NO. 1 CHAIN SUB-ASSEMBLY
