GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-841005.png)
c. Connect the sensor connector.
8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
10. INSTALL CONSOLE BOX PLATE
11. INSTALL CONSOLE UPPER PANEL ASSEMBLY
12. INSTALL FRONT CONSOLE UPPER GARNISH
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
