GS 350 RWD V6-3.5L (2GR-FSE) (2007)
ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a)
Loosen the bolt of the park/neutral position switch and move the shift lever to the N position.
(b) Align the groove and the neutral basic line.
(c)
Hold the switch in position and tighten the bolt.
Torque: 13 N*m (133 kgf*cm, 9 ft.*lbf)
(d) After adjustment, perform the inspection.
INSTALLATION
1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a)
Install the park/neutral position switch to the automatic transmission.
(b) Temporarily install the bolt.
(c)
Install a new lock washer and the nut.
Torque: 6.9 N*m (70 kgf*cm, 61 in.*lbf)