GS 350 RWD V6-3.5L (2GR-FSE) (2007)
(d) Temporarily install the control shaft lever.
(e)
Turn the control shaft lever counterclockwise until it stops, and turn it clockwise 2 notches to set it to the N position.
(f)
Remove the transmission control shaft lever.
(g) Align the neutral basic line with the switch groove, and tighten the adjusting bolt.
Torque: 13 N*m (133 kgf*cm, 9 ft.*lbf)
(h) Using a screwdriver, bend the tabs of the lock washer.
HINT: Bend at least 2 of the lock washer tabs.