GS 350 RWD V6-3.5L (2GR-FSE) (2007)
3. INSTALL CENTER PILLAR GARNISH
a. Pass the outer belt anchor through the center pillar garnish.
b. Attach the 3 clips and and claw to install the garnish. Then, install the 2 screws.
4. INSTALL CENTER PILLAR GARNISH LOWER
5. INSTALL REAR DOOR SCUFF PLATE
6. INSTALL FRONT DOOR SCUFF PLATE
7. INSTALL SEAT ASSEMBLY
8. INSTALL FRONT SEAT OUTER BELT ASSEMBLY
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. PERFORM INITIALIZATION
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
a. Perform initialization.
Rear Seat Inner Belt Assembly