GS 350 RWD V6-3.5L (2GR-FSE) (2007)
c. Detach the clip and 5 claws.
d. Disconnect the connector and remove the package tray trim panel.
13. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
a. Remove the bolt and rear seat inner with center belt assembly RH.
INSTALLATION
1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
NOTE: Do not disassemble the retractor.
a. Align the seat belt positioning hole with the claw and install the retractor of the seat belt with the bolt as shown in the illustration.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Sunshade)