GS 350 RWD V6-3.5L (2GR-FSE) (2007)
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
3. REMOVE TOOL BOX
4. REMOVE REAR FLOOR FINISH PLATE
5. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT
6. REMOVE LUGGAGE COMPARTMENT TRIM SIDE COVER INNER LH
7. REMOVE SEAT BELT CONTROL ECU
a. Remove the 3 nuts and disconnect ECU.
b. Disconnect the connector.
c. Remove the nut.
d. Detach the claw and remove the ECU.
INSTALLATION
1. INSTALL SEAT BELT CONTROL ECU
a. Attach the claw of the ECU stay to install the junction block.
b. Install the nut.
c. Connect the connector.