GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-154004.png)
b. Attach the claw and install the cushion shield assembly.
c. Install the 5 screws.
d. Connect the 2 rubber bands of the front seatback board to the seat frame.
3. INSTALL RECLINING POWER SEAT SWITCH KNOB
4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
5. INSTALL FRONT SEAT OUTER BELT ASSEMBLY
a. Move the seat using the power seat switch knob so that the seat belt anchor bolt is revealed.
b. Install the front seat outer belt anchor with the bolt.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
c. Install the seat belt anchor cover cap.
d. Install the front seat belt hole cover.
