GS 350 RWD V6-3.5L (2GR-FSE) (2007)
(i)
Install the transmission control shaft lever with the nut.
Torque: 16 N*m (163 kgf*cm, 12 ft.*lbf)
(j)
Connect the park/neutral position switch connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. ADJUST SHIFT LEVER POSITION
4. INSPECT SHIFT LEVER POSITION
5. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
6. INSTALL NO. 2 ENGINE UNDER COVER
7. PERFORM INITIALIZATION
(a)
Perform initialization.
NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.