GS 350 RWD V6-3.5L (2GR-FSE) (2007)
b. Fit the tabs on the retainer plate into the cutouts on the drive end frame to install the retainer plate.
c. Install the 4 screws.
Torque: 2.3 N.m (23 kgf.cm, 20 in.lbf)
2. INSTALL GENERATOR ROTOR ASSEMBLY
a. Place the drive end frame on the clutch pulley.
b. Install the rotor to the drive end frame.
c. Place a new generator washer on the generator rotor.
3. INSTALL GENERATOR COIL ASSEMBLY
a. Using SST and a press, press in the generator coil to the drive end frame.
SST 09612-70100 (09612-07240)