GS 350 RWD V6-3.5L (2GR-FSE) (2007)
6. INSTALL GENERATOR REAR END COVER
a. Install the generator rear end cover to the generator coil with the 3 nuts.
Torque: 4.6 N.m (47 kgf.cm, 41 in.lbf)
7. INSTALL CLUTCH PULLEY
a. Temporarily install the clutch pulley onto the rotor shaft.
b. Set SST (A) and (B).
SST 09820-63020
c. Clamp SST (A) in a vise.
d. Place the rotor shaft end into SST (A).
e. Fit SST (B) to the clutch pulley.