GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1261004.png)
^
2006 GS 300
^
2007 / 2008 GS 350
^
2006 / 2007 GS 430
^
2007 / 2008 GS 450h
^
2008 GS 460
4.
Remove the cowl side Junction Block.
A.
Disconnect all connectors.
B.
Remove the 2 nuts holding the cowl side Junction Block.
C.
Remove the bolt holding the bracket to the cowl side Junction Block.
5.
Reinstall the cowl side Junction Block in reverse order.
6.
Reassemble remaining components in reverse order.
Refer to TIS, applicable model and model year Repair Manual, Vehicle Interior Interior Panels/Trim "Instrument Panel: Instrument Panel Safety
Pad: Installation":
^
2006 GS 300
^
2007 / 2008 GS 350
^
2006 / 2007 GS 430
^
2007 / 2008 GS 450h
^
2008 GS 460
7.
Reconnect the 12V battery.
8.
Re-initialize affected electrical systems.
Refer to TSIB No. L-SB-0041-08 (2008 models) / PD007-07 (2007 models) / PD009-06 (2006 models), "Power System Initialization During
