GS 350 RWD V6-3.5L (2GR-FSE) (2007)
1. CHECK FOR DTCs
(a)
Prepare the intelligent tester.
(b) Connect the intelligent tester to the DLC3 at the lower part of the instrument panel.
(c)
Turn the engine switch on (IG) and turn the intelligent tester on.
(d) Use the intelligent tester to check for DTCs, and note or print the result (see the operator's manual for operating instructions).
(e)
Confirm the details of the DTCs.
2. CLEAR DTCs
(a)
Operate the intelligent tester to clear the DTCs (see the operator's manual for operating instructions).
Symptom Related Diagnostic Procedures
PROBLEM SYMPTOMS TABLE
Inspect the suspected areas in numerical order by referring to the corresponding pages when any of the following symptoms occurs.