GS 350 RWD V6-3.5L (2GR-FSE) (2007)
9. INSPECT SHIFT SOLENOID VALVE (SLU)
(a)
Measure the resistance according to the value(s) in the table.
Standard resistance
(b) Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, and
check operation of the valve.
NOTICE: While using the battery during inspection, do not bring the positive and negative tester probes too close to each other as a short
circuit may occur.
OK: The solenoid makes an operating sound.