GS 350 RWD V6-3.5L (2GR-FSE) (2007)
(a)
Remove the indicator light wire from the position indicator housing lower.
(b) Remove the position indicator bulb from the indicator light wire.
(c)
Remove the position indicator bulb cap from the position indicator bulb.
(d) Disconnect the transmission control switch connector from the floor shift.
(e)
Using a screwdriver, disengage the locking lug of terminals (4) and (8), and pull the terminals out from the rear.
5. REMOVE SHIFT LOCK RELEASE BUTTON
(a)
Remove the shift lock release button and spring from the floor shift.