GS 350 RWD V6-3.5L (2GR-FSE) (2007)
2. INSPECT SPEED SENSOR (SP2)
(a)
Measure the resistance according to the value(s) in the table.
Standard resistance
If the resistance value is not as specified, replace the speed sensor.
INSTALLATION
1. INSTALL SPEED SENSOR (SP2)
(a)
Coat a new O-ring with ATF and install it to the speed sensor.
(b) Install the speed sensor with the bolt.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
(c)
Connect the sensor connector.
2. INSTALL SPEED SENSOR (NT)
(a)
Coat a new O-ring with ATF and install it to the speed sensor.