GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1033002.png)
2. REMOVE NO. 2 ENGINE UNDER COVER
3. DRAIN AUTOMATIC TRANSMISSION FLUID
(a)
Remove the drain plug and gasket, and drain the ATF.
(b) Install a new gasket and the drain plug.
Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
4. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
NOTICE: Some fluid will remain in the oil pan.
(a)
Remove the 20 bolts, oil pan, and gasket.
(b) Remove the 3 magnets from the oil pan.
(c)
Examine particles in the pan.
(1) Collect any steel chips with the removed magnets.
Carefully look for foreign objects and particles in the pan and on the magnets to guess the type of wear which might be found in the
transmission.
Steel (magnetic): bearing, gear, and clutch plate wear
Brass (non-magnetic): bush wear
5. REMOVE VALVE BODY OIL STRAINER ASSEMBLY
