GS 350 RWD V6-3.5L (2GR-FSE) (2007)
Fluid - Differential: Service and Repair
DIFFERENTIAL OIL
ADJUSTMENT
1. INSPECT FRONT DIFFERENTIAL OIL (for 4WD)
(a)
Stop the vehicle on a level place.
(b) Remove the differential filler plug and gasket.
(c)
Check that the oil surface is within 5 mm (0.20 in.) of the lowest position of the inner surface of the differential filler plug opening.
NOTICE:
^ Excessively large or small amounts of oil may cause trouble.
^ After replacing oil, drive the vehicle and check the oil level.
HINT: If necessary, fill the front differential carrier with hypoid gear oil.
(d) Check for oil leakage when the oil level is low.
(e)
Install the differential filler plug and a new gasket.
Torque: 39 N*m (400 kgf*cm, 29 ft.*lbf)
2. INSPECT REAR DIFFERENTIAL OIL
(a)
Stop the vehicle on a level place.
(b) Using a hexagon wrench (10 mm), remove the differential filler plug and gasket.