GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-1042005.png)
6. INSTALL LOAD SENSING VALVE SENSOR BRACKET
a. Install the stabilizer link assembly and the load sensing valve sensor bracket to the rear suspension arm assembly No. 2 with the bolt and nut.
Torque: 27 Nm (275 kgf-cm, 20 ft. lbs.)
7. INSTALL REAR DISC
8. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY
a. Install the rear disc brake caliper assembly and caliper plates No. 1 with the 2 bolts.
Torque: 54 Nm (551 kgf-cm, 40 ft. lbs.)
NOTICE:
^
Do not twist the rear brake hose when installing the rear disc brake caliper.
^
Make sure that there are no foreign objects or damage to the threads.
^
Do not overtighten the bolts because the hub carrier is made of aluminum and may be damaged.
9. INSTALL SPEED SENSOR REAR
a. Install the speed sensor to the rear axle carrier with the 2 bolts.
Torque:
Bolt (A) 8.5 Nm (87 kgf-cm, 75 inch lbs.)
Bolt (B) 6.0 Nm (61 kgf-cm, 53 inch lbs.)
NOTICE:
^
Be careful not to damage the speed sensor.
^
Prevent foreign matter from adhering to the speed sensor.
^
Do not twist the sensor wire when installing the speed sensor.
10. INSTALL REAR AXLE SHAFT NUT
a. Install a new axle shaft nut.
Torque: 290 Nm (2,957 kgf-cm, 214 ft. lbs.)
