GS 350 RWD V6-3.5L (2GR-FSE) (2007)
a. Hold the edges of the rear sunshade with your hands, as shown in the illustration.
CAUTION: Be careful when the rear sunshade raises and lowers. Something could get caught in the rear sunshade and cause an
injury.
HINT: To prevent the motor from burning out, stop operation as soon as the rear sunshade is fully raised or lowered.
On-Vehicle Inspection
ON-VEHICLE INSPECTION
1. CHECK REAR SUNSHADE ASSEMBLY
a. Move the shift lever to P.
b. Turn the engine switch on (IG).
c. Raise the rear sunshade.
d. Move the shift lever to R, and check that the rear sunshade lowers.
Scan Tool Testing and Procedures
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT: Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without removing any parts.
Reading the Data List early in troubleshooting is one way to save time.
a. Connect the intelligent tester to the DLC3.
b. Turn the engine switch on (IG).
c. Read the Data List according to the display on the tester.