GS 350 RWD V6-3.5L (2GR-FSE) (2007)
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE COOL AIR INTAKE DUCT SEAL
3. REMOVE ENGINE UNDER COVER
4. REMOVE FRONT FENDER LINER LH
a. Using a screwdriver, remove the 2 clips.
b. Remove the 2 bolts and partially remove the fender liner.
HINT: It is not necessary to fully remove the fender liner. Partially remove it so that the bumper cover, windshield washer jar and pump can
be removed in a later step.
5. REMOVE FRONT FENDER LINER RH
a. Using a screwdriver, remove the 2 clips and partially remove the fender liner.
HINT: It is not necessary to fully remove the fender liner. Partially remove it so that the bumper cover can be removed in a later step.
6. REMOVE FRONT BUMPER COVER