GS 350 RWD V6-3.5L (2GR-FSE) (2007)
a. Using a screwdriver, disconnect the rod of the wiper link from the wiper motor as shown in the illustration.
HINT: Tape the screwdriver tip before use.
b. Remove the 3 bolts and wiper motor.
HINT: Rotate the crank arm as necessary to remove the bolts.
INSTALLATION
1. INSTALL FRONT WIPER MOTOR ASSEMBLY
a. Install the wiper motor with the 3 bolts.
Torque: 5.4 N.m (55 kgf.cm, 47 in.lbf)
b. Apply MP grease to the crank arm pivot of the wiper motor.