GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-2145008.png)
d. Install the wiper arm and blade with the nut. Make sure that the wiper arm and blade comes to the position shown in the illustration.
Torque: 22 N.m (224 kgf.cm, 16 ft.lbf)
HINT: Hold down the wiper arm hinge with your hand while tightening the nut.
7. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH
a. Stop the wiper motor at the automatic stop position.
b. Clean the wiper arm serration with a round file or equivalent.
c. Clean the wiper pivot serration with a wire brush.
