GS 430 V8-4.3L (3UZ-FE) (2004)
Solar Sensor: Service and Repair
SENSOR
REMOVAL
1. REMOVE SOLAR SENSOR
Using a screwdriver pull out the sensor and disconnect the connector.
HINT:
-
Tape the screwdriver tip before use.
-
At the time of installation, please refer to the following item.
Insert the sensor to instrument panel as shown in the Illustration.
2. REMOVE ROOM TEMPERATURE SENSOR
a. Remove the No.1 under cover.
b. Remove the room temperature sensor.
1. Remove the No.1 safety pad set bolts and screws.
2. Disconnect the connector and aspirator hose.
3. Remove the screw and sensor.