GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
Emergency Contact Module: Removal and Replacement
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
a. Remove the floor mat.
3. REMOVE LUGGAGE COMPARTMENT NO.1 LIGHT ASSEMBLY
a. Using a screwdriver, detach the claw and remove the light.
HINT: Tape the screwdriver tip before use.
b. Disconnect the connector
4. REMOVE LUGGAGE COMPARTMENT TRIM SIDE COVER RH