GS 450h V6-3.5L (2GR-FSE) Hybrid (2007)
3. REMOVE FRONT STEREO COMPONENT SPEAKER ASSEMBLY
a. Remove the 2 bolts.
b. Disconnect the speaker connector and remove the speaker.
NOTE: Do not touch the cone part of the speaker.
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart.
1. INSTALL FRONT STEREO COMPONENT SPEAKER ASSEMBLY
a. Connect the speaker connector.
b. Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.
c. Install the speaker with the 2 bolts.
NOTE: Do not touch the cone part of the speaker.
2. INSTALL SPEAKER HOLE COVER
a. Attach the 4 clips to install the hole cover.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL